Results 1 to 4 of 4

Thread: Trick scorpion setup

  1. #1
    Join Date
    Jun 2018
    Posts
    3

    Trick scorpion setup

    Could anyone help me with setup for Coleridge for a 2014 trick scorpion running clone heavy? Thanks

  2. #2
    Join Date
    Mar 2014
    Location
    Western Ky
    Posts
    48
    We ran a scorpion western pa, 47 nose, 62 cross, 57 left. Worked for us but we were adding 35 lbs to make 370. 1/2 + left front camber, 2 3/4 - right front, castor stock. Don't be afraid to hold it open going in turn, gets on rf really well. Leave axle straight, no lead unless on concrete

  3. #3
    Join Date
    Oct 2013
    Location
    Marysville, Pa
    Posts
    6,001
    Quote Originally Posted by Sanco Motorsports View Post
    We ran a scorpion western pa, 47 nose, 62 cross, 57 left. Worked for us but we were adding 35 lbs to make 370. 1/2 + left front camber, 2 3/4 - right front, castor stock. Don't be afraid to hold it open going in turn, gets on rf really well. Leave axle straight, no lead unless on concrete
    Ding, Ding we got a winner, If track makes anything close to good bite don't be afraid to go little higher on Left % age, and .75 Lf pos camber should work.

    Good Luck !!

  4. #4
    Join Date
    Mar 2014
    Location
    Western Ky
    Posts
    48
    Quote Originally Posted by racing promotor View Post
    Ding, Ding we got a winner, If track makes anything close to good bite don't be afraid to go little higher on Left % age, and .75 Lf pos camber should work.

    Good Luck !!
    Right on, that is a fast kart, gotta say though, titlest faster through corners

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •