Results 1 to 6 of 6

Thread: Cr500 rebuild advice

  1. #1
    Join Date
    Oct 2014
    Location
    Newton,Ia
    Posts
    47

    Cr500 rebuild advice

    Got a question. Iíve ran my engine for 3 seasons and have never had the bottom end apart. I feel like itís time replace the crank and bearings etc. whatís the best, most cost effective way to go about it? Anyone have good luck with hotrods bottom end kits? Thanks in advance.

  2. #2
    Join Date
    Oct 2013
    Posts
    558
    If you want the best send it to Falicon, let them rebuild it and get one of their rods and let them suggest if it needs new crank halves. Not cheap but they know what they're doing.jmo

  3. #3
    Join Date
    Oct 2013
    Location
    wv
    Posts
    58
    Ken O'CONNOR Racing rebuilt my original crank. He supplied the pro x rod, crank pin , washers and both rod bearings. 205 dollars shipped back to me last winter.

  4. #4
    Join Date
    Oct 2014
    Location
    Newton,Ia
    Posts
    47
    Trying to do this on my own.

  5. #5
    Join Date
    Oct 2013
    Location
    iowa
    Posts
    6,270
    You would need to press the crank apart and back together.
    Then true it.
    205 seems pretty reasonable.

  6. #6
    Join Date
    Oct 2013
    Posts
    140
    Quote Originally Posted by foundreverse View Post
    Got a question. Iíve ran my engine for 3 seasons and have never had the bottom end apart. I feel like itís time replace the crank and bearings etc. whatís the best, most cost effective way to go about it? Anyone have good luck with hotrods bottom end kits? Thanks in advance.
    I have Hot Rods Cranks in all of my motors. I send mine to Jim Zimmerman in Montana.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •