Results 1 to 3 of 3

Thread: '06 Phenom Setup for BMS Series in PA

  1. #1
    Join Date
    Nov 2013
    Location
    Southern Maryland
    Posts
    10

    '06 Phenom Setup for BMS Series in PA

    After a college hiatus, getting back into the kart only dirt this time. Long time asphalt racer. I know older equipment but that is what I have. Raced once on dirt with Maxxis tires. Know nothing about Burris tires or chassis setup for the PA tracks. Need chassis numbers, air pressure, and what prep and numbers to get SS-22's to. Can't have a bunch of tires, so what best to have. Also a good shop that would do tires for me.
    '06 Phenom Animal 375lb Class
    L/R Cambers
    L/R Toes
    Rear rim positions for rear track
    Front track
    R/F staggers
    Nose %
    Left %
    Cross %
    Air pressures to start with

    Any help would be greatly appreciated.

  2. #2
    Join Date
    Oct 2013
    Location
    Marysville, Pa
    Posts
    6,680
    Quote Originally Posted by Flyboy#8 View Post
    After a college hiatus, getting back into the kart only dirt this time. Long time asphalt racer. I know older equipment but that is what I have. Raced once on dirt with Maxxis tires. Know nothing about Burris tires or chassis setup for the PA tracks. Need chassis numbers, air pressure, and what prep and numbers to get SS-22's to. Can't have a bunch of tires, so what best to have. Also a good shop that would do tires for me.
    '06 Phenom Animal 375lb Class
    L/R Cambers
    L/R Toes
    Rear rim positions for rear track
    Front track
    R/F staggers
    Nose %
    Left %
    Cross %
    Air pressures to start with

    Any help would be greatly appreciated.
    The 22's will ONLY work for track roll in and very first open practice laps as long as you go early, You will need 55's & 33's for Animal Heavy class, I have an Idea on set up but there are others that will be more familiar with the Phenom so I'll wait to see what for response you get.

    You have a PM as well.

  3. #3
    Join Date
    Oct 2013
    Location
    Brodheadsville, PA
    Posts
    2,143
    Quote Originally Posted by Flyboy#8 View Post
    After a college hiatus, getting back into the kart only dirt this time. Long time asphalt racer. I know older equipment but that is what I have. Raced once on dirt with Maxxis tires. Know nothing about Burris tires or chassis setup for the PA tracks. Need chassis numbers, air pressure, and what prep and numbers to get SS-22's to. Can't have a bunch of tires, so what best to have. Also a good shop that would do tires for me.
    '06 Phenom Animal 375lb Class
    L/R Cambers
    L/R Toes
    Rear rim positions for rear track
    Front track
    R/F staggers
    Nose %
    Left %
    Cross %
    Air pressures to start with

    Any help would be greatly appreciated.
    For a Phenom, you will want to be around this for a baseline:

    46% Nose
    58% Left
    64% Cross

    -2.75 RF
    +0.25 LF

    12 RF/8 LF Castor

    1.5" Front Stagger, 1.125-1.250" Rear Stagger

    1 1/6" Toe out LF

    Tire wise, for BMS, you are going to need at a minimum 2-3 sets of 55's. Depending on how serious you want to get, you would likely want to get a set of right sides every race after that.

    We have been pretty successful with our Burris program over the years at the BMS races, especially on 55's. Let me know if we can help.
    ---------------------------------------------------------
    The Weapons - 2008 Mongoose Champ, 2004 PRC Phenom JPM Indoor Edition
    The Ammo - GKS Flathead, GKS Animal
    The Sidearm - 2006 PRC Phenom

    "We claw with our finger nails for that inch. Because we know, when we add up all those inches, that's going to make the difference between winning and losing..."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •