Results 1 to 2 of 2

Thread: Rival Stock Settings - JR2

  1. #1
    Join Date
    Jan 2019
    Posts
    7

    Rival Stock Settings - JR2

    What are the recommended Rival settings below for a JR2 running tracks between 1/8th to 1/10th mile:

    Rear axle - front or back holes.....with front holes being closest to driver?

    L-block positions - front or back.....with back being closest to driver?

    Tie rod positions on spindles?

    Thanks

  2. #2
    Join Date
    Jun 2014
    Location
    Greenville, SC
    Posts
    44
    We run the axle in the back hole on the hangars...both l blocks in the rear position and rs tie rod in the middle hole with the ls tie rod in the back hole....hope this helps if you have anymore questions please feel free to contact the shop .............thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •