OVKA Swap Meet
 
 
Results 1 to 7 of 7

Thread: Minecon

  1. #1
    Join Date
    Oct 2013
    Location
    Dothan Alabama
    Posts
    144

    Minecon

    I'm needing help with the seat placement it. How far is the right rear seat strut from the frame rail? Where does the front seat support need to be placed? How high should the back of the seat be off the axle?200lb driver with a large Nexgen seat. I would like to get cross,nose,and left side numbers if possible. Thanks.

  2. #2
    Join Date
    Oct 2013
    Location
    Marysville, Pa
    Posts
    6,516
    For your weight I'd put strut at 4 3/4" and top back of seat 8 1/2 " off axle, 45 % nose, 59 % left, 64 % cross

    Good Luck !!

  3. #3
    Join Date
    Oct 2013
    Location
    Dothan Alabama
    Posts
    144
    Thanks

  4. #4
    Join Date
    Feb 2014
    Location
    Steubenville, Ohio
    Posts
    268
    Call PRC. For a large seat I believe they’re more in the ballpark of 3-3.25 of the motor rail.

  5. #5
    Join Date
    Oct 2013
    Location
    Dothan Alabama
    Posts
    144
    I'll call them tomorrow. Thanks

  6. #6
    Join Date
    Oct 2013
    Location
    Marysville, Pa
    Posts
    6,516
    You have a PM

  7. #7
    Join Date
    Oct 2013
    Location
    Dothan Alabama
    Posts
    144
    You are correct premier8!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •